POLMAR DB-2 - Number Key Operation

58
4.Press[ ]keytoconrmand[ ]toexit.
11.Scanningfunction
Press[
]key+[ ]keytostartscanningfunction.RotatetheDIALknobto
changescanningdirection.YoucanscanunderVFO,MRandCHmodeasyour
requirement.
12.ChannelStorage
Press[
]key+[ ]keytostorethechannelsyoudesired,andyoucaninput
thechannelnumberviakeypaddirectly.RotatetheDIALknobtoselect
channelnumberandpress[
]keytostore.
13.Menumode(F+ENT)
Press[
]key+[ ]keytoentermenumode.SeeMenuOperation.
NUMBER KEY OPERATION
UnderVFOmode,youcanselectthefrequencybynumberkeydirectly.
Iftheinputnumberisoutofband,itwillprompt“ERROR”.
Ifyouinputfrequencyisavailable,thetransceiverwillenteryourdesiredfrequency.
Underchannelmode,pressnumberkeytochangethecurrentchannel.