Fit and charge
Wear on the right or left
• To position the microphone on the right or left side, rotate the microphone boom up
and over. Bend the boom so it is approximately 2 finger widths from the corner of
your mouth.
• Gently flex the headband wider if the fit is uncomfortable on your ears.
Charge your headset
Place the headset in the charge cradle. The charging LED flashes when charging the
headset and remains steady when the headset is fully charged. Charge for at least 20
minutes prior to the first use.
Headset battery status
Determine your headset battery status:
• Listen to the voice prompts after powering on the headset
• With your headset idle, view the headset battery level on your base display's
homescreen
• View in Poly Lens Desktop App
• View headset LEDs while charging in your base charge cradle
Headset battery status
Base display
homescreen or Poly
Lens Desktop App
Headset LED
while charging
Battery full
Battery high
Battery medium
Battery low
Battery critical
Tip: To reset the accuracy of the talk time alert, deplete the headset battery then charge
fully.
Talk Time
With a full charge, the headset provides up to 13 hours of talk time.
10
To Next Page
Loading...
