More Features
Change voice prompt language
Change the voice prompt language on your headset in Poly Lens Desktop App.
Optimize audio quality
There are 3 audio modes: wideband stereo (hybrid), wideband (conversation) and
multimedia (music).
To optimize your audio quality for your activity, with the system idle, do one of the
following:
• Press the headset Mute button for 4 seconds. The headset cycles through the modes
with each 4 second press.
• Configure in Poly Lens Desktop App: Select Product name > Settings > Wireless >
Audio quality and select from 3 audio modes.
Limit office noise
You can limit the amount of nearby conversation that is transmitted during your calls.
There are 3 modes: No Limiting, Best Audio, and Open Office.
Customize feature in Poly Lens Desktop App by going to Product name > Settings >
General > Close conversation limiting. Select from 3 modes.
Note: For best performance, bend the microphone boom so it is approximately two
finger widths from the corner of your mouth.
Remove or connect a headset charge cradle
Remove a headset charge cradle from the base or connect a new charge cradle.
1 Locate the cradle release slider below the cradle on the back of your base and slide
and hold it to the left to unlock the cradle.
2 Pull the cradle up to remove it from the base.
3 To connect the headset charge cradle to the base, align the cradle pins with the base
and press firmly. You hear it click into place.
Set the range
Changing the range can help with PC audio quality, improve user density or restrict range
of users.
You can adjust the range setting in Poly Lens Desktop App.
18
To Next Page
Loading...
