Poly VVX 310 User Manual

Poly Telephone Configuration in Administrator Portal
POPP Hosted Microsoft VoIP Phone System
© POPP.com, Inc. All rights reserved.
For service, call 763-797-7900 or visit www.popp.com
Page 1 of 4 5/27/22
1. Logging In
• Go to: http://portal.popp.com/bg
• Number: enter 10-digit phone number (phone number must be set up by POPP with
administrative access) or e-mail (if e-mail login is enabled)
• Password: enter the password and click [Login]
2. Individual Telephone Configuration
1. Click [Phones]
2. Check the box next to the phone to be
configured
3. Click on [Actions] and select [Configure phone]
4. Click [Edit]
5. Click [Programmable Keys – Line] (or click on the line keys
on the telephone) to configure a line key button:
o A list of keys (“Key 1”, “Key 2”, etc.) will appear
below. The key numbers listed correspond to the line
key buttons on the telephone as follows:
Poly VVX 150:
Key 1
telephone display
Key 2

Poly VVX 310 Specifications

General

Lines	Up to 6 lines
Protocols	SIP
Bluetooth	No
Wi-Fi	No
Audio	HD Voice
Ethernet Ports	2 (10/100 Ethernet)
Power over Ethernet	Yes
Headset Port	Yes
Speakerphone	Yes
Audio Codecs	G.711, G.722, G.729, iLBC
Supported Platforms	Asterisk, Broadsoft, Metaswitch
Weight	2.2 lbs

Summary

Logging In

Individual Telephone Configuration

Configure Programmable Line Keys

Configure line keys by selecting functions and assigning labels for telephone display.

Configure Softkey Buttons

Configure softkey buttons on the telephone, mapping keys to specific functions.

Key Configuration Details and Reboot

Set key functions, numbers, extensions, lines, labels, save changes, and reboot the phone.

Multiple Telephones (Phone Profiles) Configuration

Manage Phone Profiles

Access and manage phone profiles for department administrators to set default configurations.

Modify Phone Profiles

Edit phone model profiles to change button programming for all phones of that model simultaneously.

Modify Telephone Display Background Image