What to do if Polyaire airtouch shows Error Code FFFF or FFFC?
This error indicates that the Gateway is connected, but the AC unit either isn't receiving power or has lost communication. Ensure that the AC is powered on and check the communication lines between the Gateway and the AC unit.
Why does my Polyaire airtouch display Error Code FFFE?
Error Code FFFE on your Polyaire Controller suggests an issue with the gateway switch settings or a faulty gateway. Examine the gateway switch settings to ensure they are correctly configured. If the problem persists, the gateway itself may be defective.
Describes the user interface and control unit.
Details the system's central processing units.
Explains the function of air supply adjustment components.
Describes sensors for temperature monitoring.
Information on units connecting to AC systems.
System settings for operation and control.
Airflow adjustment and sensor management.
Combining multiple zones into single control groups.
Integrating and configuring air conditioning units.
Network connection and firmware updates.
General| Category | Controller |
|---|---|
| Manufacturer | Polyaire |
| Power Supply | 24VAC |
| Communication Protocol | Proprietary |
| Operating Temperature | 0°C to 50°C |
| Display | Touchscreen LCD |
To Next Page
