31
The WiFi device is with the console which is an Android tablet. Connecting AirTouch
4 to the home router is the same as setting up WiFi for a normal Android tablet.
It’s in the Setting app on the tablet. If AirTouch 4 is running, minimize it and go to
Setting, nd WLAN and the available WiFi network will appear. Choose the correct
one and key in the password to connect. After successful connection, the Wi-Fi
logo will appear on the status bar. AirTouch 4 apps from Apple Store or Play Store
can be run from mobile devices now. The connection will stay permanent till the
setting changes on the home router such as SSID, password, security levels, lters
and others. The connection will automatically resume after power o and on cycle.
5.10 Setting up Wi-Fi Connection
5.11 Testing Damper On/O
a) Switch on the air conditioner.
b) Enter the home screen of AirTouch 4.
c) Touch the group buttons to turn groups on or o to check if the dampers are
correctly connected by feeling the air at the outlet.
d) The Turbo group can be tested by selecting the relevant chosen group as
Turbo mode in the 'Settings' and then press the group button until active
turbo mode is displayed on the screen for that particular group.
Setting up WiFi Connection & Testing Damper ON/OFF & Wiring Diagrams
To Next Page
Loading...
