15
There are two sets of settings, the installer’s and user’s. In the installer’s settings,
the followings can be set: parameters, balancing, sensors, spill, grouping, service
and AC. These settings are protected by a password which has default value
Polyaire but can be changed. Touching Installer’s button in the Settings list will
bring up password input page. After inputting the correct password, installer’s
setting page will come up. In the user’s settings which are discussed in User’s
Manual, the followings can be set: owner name, date/time, group name, WiFi,
turbo group, temperature display, touch tone, child lock and temperature alert.
5. Recommended Commissioning Procedure
Recommended Commissioning Procedure
To Next Page
Loading...
