User Guide SoundPoint IP 330/320
2 - 4
3. Press to confirm your choice.
4. Press or repeatedly to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>>
Press twice.
All calls will now go to your headset, unless you switch to handset or
speakerphone modes.
Headset Hookswitch
This feature enables electronic hookswitch support.
To select a headset that supports electronic hookswitch:
1. Press .
2. Use the or to select your headset and press the Select soft key.
3. Press or the Exit soft key repeatedly to return to the idle.
For information on supported headsets to provide electronic hookswitch features of
placing, answering, and ending calls, go to www.polycom.com/support/voice and
enter the string “Headset Compatibility List” in the Knowledge Base text box.
To Next Page
Loading...
Need help?
General