User Guide SoundPoint IP 330/320
3 - 12
To perform a blind transfer:
1. During a call, press the Trans soft key.
2. Press the Blind soft key.
3. Do one of the following steps:
a Enter the number to which you want to transfer the call.
b Press the Dir soft key to access the local contact directory, use
and to access the contacts, and then press .
c Press the Dir soft key to access the corporate directory, search for the
desired contact, and then press .
d Press the Callers soft key to access the Received Call list, use
and to access the contact, and then press .
e Press to access the Placed Call list, use and
to access the contact, and then press .
At this point, the call is connected to the number to which you are
transferring them.
Forwarding Calls
You can configure your phone so that all incoming calls are forwarded to
another party (known as static forwarding).
All incoming calls can be forwarded to another party while Do Not Disturb is
enabled on your phone. For more information, contact your system
administrator.
Note
Call Forwarding is not available on shared lines.
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
To Next Page
Loading...
Need help?
General