User Guide SoundPoint IP 330/320
3 - 4
b With the optional headset connected, dial the desired number using
the dial pad.
Press .
c Press .
You will hear a dial tone. You can enter the desired number now.
To place a call using the Dial key:
1. Do one of the following steps:
a Press the Callers soft key to view the Receive Call list.
b Press to view the Placed Call list.
2. Use and to scroll through the list to find the contact.
3. Press to complete the call.
Answering a Call
When you are not in another call, you can answer a call in three basic ways
using your SoundPoint IP 330/320 phone:
• Using the handset
• Using the speakerphone
• Using the headset
The steps for answering an incoming call when you are in another call are
different if your phone is configured for:
• A single Line Key per line
Note
To permanently enable your headset, refer to Headset Memory Mode on page 2-3.
To Next Page
Loading...
Need help?
General