Polycom IP 450 - Basic Telephony Features; How to Place a Call

Basic telephony features
• How to place a call?
• Using the handset:
1. Type the number on keypad
2. Press the Dial button
3. Pick-up the handset
• Using the speaker:
1. Type the number on keypad
2. Press the Speaker button
3. Press the Dial button
1. Pick-up the handset
2. Type the number
3. Push the Send soft key
1. Press the Speaker button
2. Type the number
3. Push the Send soft key
OR
OR
Note :
 You must add a « 0 » before any external number
 Emergency numbers can be dialed without any preceeding « 0 » (100, 110,…)