Polycom RealPresence Group 700 system - Starting and Stopping Camera Tracking with Eagleeye Director

User’s Guide for the Polycom RealPresence Group Series
12 Polycom, Inc.
To open or close the privacy shutter on the Polycom EagleEye View camera:
>> Move the slider to the right to close the privacy shutter, or to the left to
open it. You can still make and receive calls when the shutter is closed, but
the people at the far end cannot see you.
Starting and Stopping Camera Tracking with EagleEye Director
If EagleEye Director tracking is enabled, the camera follows the person or
people who are speaking. This tracking action, also called automatic camera
positioning, can be manually started or stopped.
In a call, you can start and stop camera tracking.
To start camera tracking:
>> Using your remote control, go to > Cameras > Start Camera Tracking
and press the Select button.
To stop camera tracking:
>> Using your remote control, go to > Cameras > Stop Camera Tracking
and press the Select button.
Camera tracking can also start or stop based on the following actions:
• Camera tracking starts automatically when you make a call.
• Camera tracking stops once you hang up a call.
• Camera tracking temporarily stops when you mute the RealPresence
Group system. It resumes when you unmute the RealPresence Group
system.