User’s Guide for the Polycom RealPresence Group Series
14 Polycom, Inc.
To store a preset:
1 Select > Cameras > Presets.
2 Adjust the camera angle or zoom the camera in or out to the desired
position.
3 Press and hold a number to store the preset position.
A snapshot is taken and replaces any existing preset stored at the number
you entered.
Switching Between Full-Screen Video and the Home Screen
When your call connects, the system automatically shows video on the whole
screen. You can switch back to the home screen during a call if, for example,
you need to adjust a user setting and your system is configured to allow you
to do so.
To see the Home screen:
>> Press on the remote control.
To see the full screen:
>> Press on the remote control.
Controlling What You Hear
Adjusting Volume
You can raise or lower the volume of the meeting. Changing the volume affects
only the sound you hear at your site.
To adjust the volume:
>> On the remote control, press and hold or to increase or decrease
the near-end volume.
You cannot delete a preset. Instead, overwrite an existing preset with a new
camera position.
To Next Page
Loading...
Need help?
General
