Polycom realpresence trio 8800 - Change Your Password; Sign Into Lync 2013

Horizon | Polycom RealPresence Trio 8800 Full User Guide
© Gamma 201
5. All rights reserved. Confidential.
Page 19 of 33
However, you cannot end calls on hold. You must resume held calls before ending them.
Procedure
1. Do one of the following:
▪ Tap Hang Up .
▪ In the Calls screen, select the call and tap Hang Up .
▪ In the Calls screen, select a held call, tap Resume , and tap Hang Up .
Holding and Resuming Calls
When you are in a call, you can place an active audio call on hold and resume the call.
When you place a call on hold, the Mute key indicators on the system and microphones are red. When you
are placed on hold, the Mute key indicators on the system and microphones flash green.
Hold a Call
You can place any active call on hold on Polycom Trio 8800
Procedure
1. During an active call, select Hold .
2. If you're in the Calls screen, select the call first.
3. The Resume icon is displayed.
Resume a Call
You can view and resume all held calls on the phone.
Procedure
1. Do one of the following:
• Select Resume .
• From the Calls screen, select the call and select Resume .
Transferring Calls
You can transfer active or held calls to another person using the following transfer types:
Blind transfer—Transfers the call directly to another line without speaking with the other party first.