Polycom SoundStation IP 6000 Quick Start Guide

6
Volume
You can easily adjust the ringer or call volume on the conference phone.
• To change the volume during an active call, press the volume control
buttons to increase or decrease the volume.
• To change the ringer volume, press the volume control buttons when the
phone is either idle or ringing.
Microphone
Although the microphone picks up your voice, you can mute your microphone so
others cannot hear you when you’re using the phone.
• During an active call, press the Mute button so others can’t hear you.
• Press the Mute button again to unmute.
Do Not Disturb
To disable ringing and forward all your calls directly to voicemail:
1. Press Menu and then Features.
2. Toggle to Do Not Disturb, and press Select to enable or disable.
• When enabled, an X icon will display in the top left of the screen.
Ringtones
To change your incoming call ringtone:
1. Press the Menu button.
2. Select Settings, Basic and then Ring Type.
3. Use the arrow buttons to scroll to the desired ring type, and press Select.
• To listen to a ringtone before selecting it, press Play.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)