When the system is locked, you can:
•
Place outgoing calls to emergency and authorized numbers.
•
Enter a password to answer incoming calls.
Related Topics
Logging Into and Locking the System
Place a Call from a Locked Phone
Answer a Call on a Locked Phone
Lock the Phone
When you lock the system, you can choose to enable one of the following options:
•
Allowing ringing when locked—incoming calls ring on the system, and you can answer calls by
entering a user password.
If you set up the system to allow you to answer incoming calls when locked, you can answer
calls by entering your user password.
•
DND when locked—Do Not Disturb applies to all lines and the system does not ring for
incoming calls.
Procedure
1 Navigate to Settings > Basic > Lock Phone.
2 On the Lock Phone screen, select a setting.
3 Select Lock.
Unlock the Phone
Your system administrator provides you with a user password that you can use to unlock Polycom Trio
systems.
Procedure
1 Select Unlock.
2 Enter your user password, or guest PIN if signed in as a guest on a host phone, and select
Unlock.
Printed from Polycom, Inc. (http://documents.polycom.com) Page 24
To Next Page
Loading...
Need help?
General
