Polycom VoiceStation 500 User Manual

VoiceStation™ 500 - 12
3. Dial the call using the keypad of the
VoiceStation™ 500.
4. To end the call, press the On/Off
button on the VoiceStation™ 500.
5. Press the Hold button on the
VoiceStation™ 500 to resume the
call with the Bluetooth device.
Changing between calls in different modes
(POTS to/from Bluetooth)
1. To make a POTS call while in Blue-
tooth mode, press the Mode button,
press the On/Off button, then dial
the phone number. When complete,
press the On/Off button. Press the
Mode button to return to the call in
Bluetooth mode.
2. To answer a POTS call while in
Bluetooth mode, press the On/Off
button.
Disconnecting Bluetooth link using
VoiceStation™ 500
• Press and hold the Mode button for
three seconds. You should see the
blue LED turn to slow blinking and
hear an audio beep.

Polycom VoiceStation 500 Specifications

Power

voltage	110V 60Hz AC / 220V 50Hz AC
console loudspeaker volume	86 dBA SPL at 0.5 m
console loudspeaker frequency response	300 to 3300 Hz

Microphone

microphone frequency response	300 to 3500 Hz
microphone pickup range	7 ft.
number of microphones	3 cardioid microphones

Operating Environment

operating temperature	5º to 40º C
relative humidity	20% to 85% (non-condensing)
storage temperature	30º-55º C

Recommended Room Conditions

room size	<25 m² or 5m X 5m
noise level	<48 dBA
reverberation time	<0.4 seconds

Weight and Dimensions

dimensions	24.2 cm x 23.5 cm x 7.6 cm
dimensions (imperial)	9.5 in x 9.25 in x 3.0 in
weight	0.57 kg