EasyManuals Logo

Polycom VoiceStation 500 User Manual

Polycom VoiceStation 500
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
VoiceStation™ 500 - 14
2. When the incoming call ring is
heard, answer it as you normally
would.
Redialing the last dialed number in Wired
Audio Mode
Redial the last number using
the mobile phone or computer
connected to the VoiceStation™
500.
Transferring audio between devices in
Wired Audio Mode
The connector cable (mobile phone
or computer) with 2.5 mm connec-
tor needs to be removed from the
mobile phone or computer.
Changing between calls in Wired Audio
Mode
The Mode button can be used to swap be-
tween the POTS, Bluetooth and the Wired
Audio calls:
1. Making/Answering a POTS call
when in Wired Audio Mode: Press
the Mode button, press the On/Off
button, make/answer the phone call.
The Amber LED should not be lit.
When nished, press the On/Off
button, then press the Mode button
again.
2. Making/answering a Bluetooth call
when in Wired Audio Mode: Press
the Mode button, then make/answer
the phone call. The Bluetooth LED
should be on (blue). When nished,
press the Mode button again. The
LED should return to amber.
Muting a call on VoiceStation™ 500
1. Press the Mute button on the
VoiceStation™ 500 to mute/unmute
a call as described in the “POTS
Mode” section of this User Guide or;
2. The mobile phone Mute/Unmute
button can be used.
Changing Volume
1. Press the Volume Up/Down buttons
on the VoiceStation™ 500 to adjust
the volume to the desired level as
described in the “POTS Mode” sec-
tion of this User Guide or;
2. Use the mobile phone to adjust the
volume.
Recording an audio call
Please refer to the ‘Record a Con-
versation’ section of this Users
Guide as described in the “POTS
Mode” section of this User Guide.
Disconnecting Wired Audio Mode on
VoiceStation™ 500
1. End the phone call as you normally
would.
2. Unplug the cable from the
2.5mm port on the side of the
VoiceStation™ 500. The amber
LED should turn off, bringing the
VoiceStation™ 500 to POTS mode.

Other manuals for Polycom VoiceStation 500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom VoiceStation 500 and is the answer not in the manual?

Polycom VoiceStation 500 Specifications

Power IconPower
voltage110V 60Hz AC / 220V 50Hz AC
console loudspeaker volume86 dBA SPL at 0.5 m
console loudspeaker frequency response300 to 3300 Hz
Microphone IconMicrophone
microphone frequency response300 to 3500 Hz
microphone pickup range7 ft.
number of microphones3 cardioid microphones
Operating Environment IconOperating Environment
operating temperature5º to 40º C
relative humidity20% to 85% (non-condensing)
storage temperature30º-55º C
Recommended Room Conditions IconRecommended Room Conditions
room size<25 m² or 5m X 5m
noise level<48 dBA
reverberation time<0.4 seconds
Weight and Dimensions IconWeight and Dimensions
dimensions24.2 cm x 23.5 cm x 7.6 cm
dimensions (imperial)9.5 in x 9.25 in x 3.0 in
weight0.57 kg

Related product manuals