Chapter 3 - System Commands
© Polycom, Inc. 3 - 51
reboot reboot [y|n]
reboot y
Where:
•y: Reboots the system.
•n: Does not reboot the system.
Restarts the system. After
entering reboot the user is
prompted with "reboot, are you
sure? <y,n> "
User interface screen location:
System > Diagnostics > Reset
System: Reset System
reboot y
serialnum serialnum Returns the serial number of the
VSX system.
User interface screen location:
System > System Informa-
tion: Serial Number
serialnum
returns something like
this:
0202430240x2aa
sysinfo sysinfo <register|unregister>
Where:
•register: Registers the shell session
to receive ISDN, IP, and gatekeeper
status notifications.
•unregister: Unregisters the shell
session for ISDN, IP, and
gatekeeper status notifications.
Registers or unregisters the
shell session to receive ISDN,
IP, and gatekeeper status
notifications.
sysinfo register
techsupport techsupport <"phone number">
Where:
• “phone number”: Phone number
at which the user of this system will
be contacted. To obtain rapid
assistance, include the area code
with the phone number. Enclose the
string in quotation marks if it
includes spaces. Example: “512 555
1212”
Sends your phone number to
Global Management System
technical support if your system
is managed by the Global
Management System.
User interface screen location:
On the remote control press the
Info button or Help button and
select Support
Note: The Support icon is visi-
ble only when the system is
registered with the Polycom
Global Management System.
techsupport
"1 512
555 1212"
Command Syntax Description Example
To Next Page
Loading...
Need help?
General
