Polycom VSX Series User Manual

Administrator’s Guide for the VSX Series
4 - 10
3. Select and configure these settings:
Setting Description
Monitor 1
VSX 5000
VSX 6000
VSX 6000A
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Select the video source(s) to display on Monitor 1. For more
information about how this setting can affect your display, refer to
Video Source Output Examples for Multiple Monitors on page
Appendix-1.
Monitor 2
VSX 5000
VSX 6000
VSX 6000A
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Select the video source(s) to display on Monitor 2. For more
information about how this setting can affect your display, refer to
Video Source Output Examples for Multiple Monitors on page
Appendix-1.
Visual
Concert VGA
Out
VSX 5000
VSX 6000
VSX 6000A
VSX 7000
VSX 7000s
Specifies whether to show content on the Visual Concert VSX
display.
VGA Out
VSX 7000e
VSX 8000
Specifies whether to show content on the display connected to
the system’s VGA output.
VCR Record
Source
VSX 7000s
VSX 7000e
VSX 8000
Specifies the video source to be recorded to videotape or DVD.
If Far is enabled, the recorded video will switch to the current far
site speaker. If both Near and Far are enabled, the recorded
video will switch between near and far sites depending on the
current speaker. This selection is available only when you are
using a single monitor.

Polycom VSX Series Specifications

General

Video Standards	H.264, H.263++
Audio Standards	G.711, G.722, G.722.1, G.728
Network Protocols	H.323, SIP
Video Inputs	S-Video, Composite video
Video Outputs	Composite, S-Video, DVI, HDMI
Audio Inputs	Line In
Audio Outputs	Line Out
Data Collaboration	H.239
Network Interfaces	Ethernet
Power Consumption	Varies depending on the specific model and configuration.