Polycom VSX Series User Manual

Administrator’s Guide for the VSX Series
2 - 34
Powering On Set-top and Component Systems
For set-top systems, the power switch is on the back panel.
For component systems, the power switch is on the front. The indicator light
in the switch provides this information:
• Light is green — system is powered on
• Light changes to from green to red, then to blue — system is powering off
• Light is blue — system is powered off
• Light is off — system is not connected to power

Polycom VSX Series Specifications

General

Video Standards	H.264, H.263++
Audio Standards	G.711, G.722, G.722.1, G.728
Network Protocols	H.323, SIP
Video Inputs	S-Video, Composite video
Video Outputs	Composite, S-Video, DVI, HDMI
Audio Inputs	Line In
Audio Outputs	Line Out
Data Collaboration	H.239
Network Interfaces	Ethernet
Power Consumption	Varies depending on the specific model and configuration.