Setting Up Your System Hardware
2 - 27
Placing Speakers to Play Stereo from Far Sites
The Polycom StereoSurround kit is designed for use with VSX systems. It
includes two speakers and a subwoofer. If you do not choose to connect
external speakers, you can use your monitor’s speakers to receive stereo.
You cannot receive stereo with a set-top VSX system using the system’s
built-in speaker.
When you set up the system for StereoSurround, the left microphone and
speaker should be on the left from the local room perspective. The system
reverses the left and right channels for the far site, as shown in the following
illustration. This ensures that the sound comes from the appropriate side of the
room.
Left
Right Left
Right
Sending stereo
Receiving stereo
To Next Page
Loading...
