Customizing the VSX System
4 - 23
5. Select and enter audio output settings for the VSX 8000 system:
6. Select and enter VCR/DVD settings for the VSX 8000 system:
VCR/DVD In Level
VSX 7000s
Sets the playback volume of the VCR/DVD player relative
to other audio from the system.
VCR/DVD Out Level
VSX 7000s
Sets the volume at which the call is recorded.
VCR/DVD Audio
Out Always On
VSX 7000s
Allows you to record a call using one VCR or DVD, while
playing recorded content into the call from a second VCR
or DVD.
Do not select this setting if you have only one VCR or DVD
player connected. If this setting is disabled, the VCR audio
output is disabled when VCR is the selected camera
source.
Setting Description
Setting Description
Balanced Out (600
ohms)
Specifies whether volume for a device connected to the
balanced audio output connectors is variable or fixed.
•Variable—Allows users to set the volume with the
remote control.
•Fixed—Sets the volume to the Audio Level specified in
the system interface.
Line Out 2 Phono Specifies whether volume for a device connected to the
audio line out connectors is variable or fixed.
•Variable—Allows users to set the volume with the
remote control.
•Fixed—Sets the volume to the Audio Level specified in
the system interface.
Setting Description
Line Input (Red)
Line Input (White)
Select VCR when playing a VCR into the system.
Select Visual Concert when sharing content using an
ImageShare II, Visual Concert VSX, or laptop connected
directly to the system.
Level Sets the playback volume of the VCR/DVD player relative
to other audio from the system
To Next Page
Loading...
Need help?
General
