Polycom VSX Series

Administrator’s Guide for the VSX Series
Index–2
audio
balanced, configuring 4-22
cable (illustration) 1-6
configuring 4-20–4-28
configuring equipment type 4-22
configuring for sharing content 4-17
configuring for VCR/DVD 4-23
configuring for Visual Concert VSX or
ImageShare II 4-23
data rate (call statistics) 6-2
diagnostics 7-6
guidelines for using Polycom microphones
2-20
guidelines for using SoundStation VTX 1000
2-20
ImageShare II or Visual Concert VSX output
4-17
meter test 7-6
mixer, See Vortex mixer
port, web streaming 4-57
protocol (call statistics) 6-2
sound effects volume 4-20
StereoSurround 4-21
subwoofer 4-24
troubleshooting 7-25
VCR/DVD settings 4-3, 4-18, 4-19
Audio (screen) 4-25
Audio I/O (screen) 4-18
Audio Input (screen) 4-27, 4-28
Audio Levels (screen) 4-18, 4-25
Audio Meter (screen) 4-28, 7-6
Audio Port (setting) 4-57
Audio Protocol (setting), for broadcasting 3-26
Audio Settings (screen)
4-17, 4-20
audio/video combination cable (illustration) 1-3
Authentication PIN (setting) 3-7
Auto Adjust for Daylight Saving Time (setting)
4-46
Auto BRI Configuration (setting) 3-20
Auto mode (multipoint display) 4-41
Auto-Answer Multipoint (setting) 4-38, 4-39,
4-41
Auto-Answer Point to Point (setting) 4-38, 4-39
auto-answer, muting 4-20
automatic camera tracking
calibrating 4-3, 4-4
configuring 4-4
setting up 2-15
troubleshooting 7-21, 7-22
Automatic Camera Tracking to Presets (setting)
4-4
automatic restart, actions that cause 3-4, 3-5,
4-36, Appendix-10
automatically detect SPIDs 3-20
Avaya network integration 3-9
B
back panel view
VSX 3000 and VSX 3000A 2-1
VSX 5000 2-2
VSX 6000 2-3
VSX 6000A 2-4
VSX 7000 2-5, 2-6
VSX 7000e 2-7
VSX 7000s 2-6
VSX 8000 2-8
Backlight Compensation (setting)
4-2
balanced audio, configuring 4-22
Balanced Out (600 ohms) (setting) 4-23
bandwidth
allowing users to specify 4-48
dynamic 3-16
managing 3-11, 3-16, 3-30
specifying 3-16
specifying allocations for People and Content
4-16
bandwidth, See also call speed
basic mode 3-28, 5-4, 7-4
bass adjustment 4-24
battery icon 7-29
Baud Rate (setting) 4-29, 4-30
BNC adapter cable (illustration) 1-8
Bonding (setting) 3-21
BRI network interface
cable (illustration) 1-2
capabilities 2-12
channels to dial in parallel 3-19
configuring 3-19, 3-20
connecting to set-top and component systems
2-14
connecting to VSX 3000 and VSX 3000A 2-13
enabling/disabling lines 3-20
hardware requirements 2-13, 2-14
lights 7-31
specifying B1 and B2 channel numbers 3-20
voice algorithm 3-20
brightness, camera 4-2
broadcast mode
configuring
3-26
enabling 3-26
browser, configuring to use VSX Web 5-1
burn-in prevention for monitors 4-12