Polycom VVX 150 - Quick User Guide Manual

Polycom
®
VVX
®
150 Business IP Phones
Quick user Guide
HOME SCREEN
Displays messages, settings, and information.
Available anytime.
CALLS SCREEN
Displays all active and held calls. Available when you
have an active or held call in progress.
LINES SCREEN
Displays phone lines, favourites, and conditional soft keys.
Available anytime.
SWITCH AMONG PHONE SCREENS
You can view any screen on your phone from other
screens.
To switch between screens, do one of the following:
- Press the Home key to display the home screen
from the lines, calls or active call screen.
- Press the Lines soft key to access the lines screen
from the calls or new call screen.
- Press the Calls soft key to access the calls screen
from the lines screen.
- On VVX 150 phones, press the C > L soft key to
display the lines screen from the calls screen.
- On VVX 150 phones, press the L > C soft key to
display the calls screen from the lines screen.
PLACE CALLS
You can only have one active call in progress on your phone.
Quick Start Guide (May 2018)
Hosted PBX
To place a call, do one of the following:
- Pick up the handset, press or , enter the
phone number and press Send.
- Enter the phone number, press Dial and pick up
the handset, or press
.
- From the lines screen, press the line key, enter
the phone number, and select Send.
- From the home screen, select New Call, enter
the phone number, and press Send.
- Select a Favourite from the home screen.
- Select a contact from the Recent Calls and
Contact Directory.
ANSWER CALLS
You can answer calls on your phone using the
handset, speakerphone, or a headset.
To answer a call, do one of the following:
- To answer with the speakerphone, press
or press the Answer soft key.
- To answer with the handset, pick up the handset.
- To answer with a headset, press
.
END CALLS
You can end active calls at any time. To end a held call,
you must resume the call rst.
To end an active call:
- Replace the handset in the cradle, press or ,
or press the End Call soft key.
To end a held call:
- Select the held call and press Resume, press End Call.
HOLD AND RESUME CALLS
You can have multiple calls on hold and resume a call
at any time.
To hold a call:
- Select the call and press the Hold soft key.
To resume a call:
- Select the call and press the Resume soft key.
TRANSFER CALLS
You can transfer calls to any contact.
To transfer a call:
- Press and the Transfer soft key.
- Choose Blind or Consultative.
- Dial a number or choose a contact. If you choose
Blind, the call is transferred immediately. If you choose
Consultative, press the Transfer soft key after speaking
with your contact.