Quick Reference Guide: Polycom VVX 150
Home Screen
• Displays Messages, Settings,
and Information.
• Available anytime.
Calls Screen
• Displays all Active and Held calls.
• Available when you have an active
or held calls in progress.
Lines Screen
• Displays Phone lines, Favorites,
and conditional Soft keys.
• Available anytime.
Switch among Phone Screens
You can view any screen on your phone from other screens.
To switch between screens
• Do one of the following:
• Press the Home key to display the Home screen from the Lines, Calls or Active Call
screen.
• Press the Lines soft key to access the Lines screen from the Calls or New Call Screen.
• Press the Calls soft key to access the Calls screen from the Lines screen.
• Press the C > L soft key to display the Lines screen from the Calls screen.
• Press the L > C soft key to display the Calls screen from the Lines screes.
Place Calls
Using the handset
• Dial the number you are calling, then pickup the
handset.
Note: You may place a call by picking up the handset
and dialing. Just be aware the system will attempt
to complete the call after a slight pause in entering
digits on the dial pad.
Using the speakerphone
• With the handset in the cradle, dial the number you
are calling then press or the Send soft key.
Answer Calls
Using handset
• When a call comes in, pickup the handset.
Using the speakerphone
• When a call comes in, press , the blinking line key,
or the Ans soft key.
Phone Layout
Line Keys
Line keys enable you to select a phone line, view calls on a line, or
quickly call a favorite contact.
Soft Keys
Soft keys enable you to select context sensitive keys that display
along the bottom of the screen.
Navigation Dial
The navigation keys enable you to scroll through information or
options displayed on the phone’s screen. The select key enables you
to selects a eld of displayed data.
Buttons
Buttons are physical keys on your phone which are programmed and
labeled to always perform a specic function (e.g., Microphone mute).
Answer a Second Call
When a second call comes in, press the Ans
soft key or the blinking line key The active call is
automatically placed on hold.
Hold and Resume Calls
Place a call on hold
• Press or the Hold soft key during an active
call. The line key controlling that call will blink.
Resume a held call
• Press the blinking line key or the Res soft key.
Note: If you have more than one call on hold,
press the up/down arrow keys on the navigation
dial to select the desired call before pressing the
Res soft key.
092206
To Next Page
Need help?
General
