Polycom VVX 150 Quick Start Guide

Phone Screens - connued
• Calls Screen - Automacally displays list of Acve and
Held calls.
• Number of calls displays
under associated Line.
• Press L > C to access Calls
screen from Lines screen.
• Use Navigaon/Select key arrows to select a call.
Phone Icons Legend
The following keys display on phone models:
Keys Funcons
Displays Home screen or Main Menu.
Turns headset o/on.
Turns speakerphone o/on.
Mutes/unmutes the phone speaker.
Holds a call. Resumes a Held call.
Transfers a call.
Accesses voicemail.
Adjusts the volume.
Place a Call
Only one call can be Acve at a me. Do one of the
following to place a call:
• Use the handset, headset or speakerphone, rst.
Enter the phone number and Send.
• Enter a phone number and Dial. Use the handset,
headset or speakerphone.
• From Home, select Call. Enter a phone number and
Send.
• From Lines, press the Line key. Enter a phone
number and Send.
• Select a number from Dir > Contact Directory or
Recent Calls > Dial.
Hold and Resume a Call
During an Acve call, select Hold. The Hold icon appears
on the screen. Press Res (Resume) to resume call.
Answer a Call
To answer a call, li the handset or to answer a new call
while on an Acve call, press Answer. The current call is
placed on Hold.
The maximum Acve, Incoming or Held calls allowed at
one me are 8 calls.
Forward a Call
Manually Forward incoming calls:
1. While the phone is ringing, press Fwd.
2. Enter a phone number and Forward.
Automacally Forward all calls:
1. Press Fwd (Forward) from the Home screen. Select a
Line, if available.
2. Select a Forwarding Type (Always, Busy, No Answer).
If selecng No Answer, enter the number of rings
before the call is forwarded.
3. Enter a forwarding number and Enable.
Disable call forwarding:
1. Select Fwd and a Line, if mulple Lines.
2. Select a Forwarding Type and Disable.
Forward a Call with Find Me / Follow Me:
Set up Find Me / Follow Me in Applicaon Framework or
the portal to forward calls, using the linked instrucons
Transfer a Call
Transfer a call as follows:
1. Press and hold Tsfr (Transfer).
2. Select Blind or Consultave (Cnslt).
3. Dial a number or choose a Contact.
• If Blind, the call transfers immediately.
• If Consultave, press Transfer or aer hearing
the ring-back or speaking with the person.
End a Call
Use one of the following opons to end an Acve call:
• Replace the handset, press headset or speakerphone
key, or press End.
• To end a call on Hold, resume the call rst. Navigate
to Calls, select the call and press Res > End.
Redial the Last Called Number
Re-call the last called number with Redial.
• Navigate to Home > Redial.
This guide covers the basic features and operaon of the
two-line, entry-level Polycom® VVX® 150 IP desk phone
with Polycom® UC Firmware 5.5.1 or later and SIP 5.8.0
or later.
For more informaon, refer to the Star2Star Knowledge
Base.
Copyright © 2019, Star2Star Communicaons®, LLC. All rights reserved. Star2Star is a registered trademark of Star2Star Communicaons, LLC. Polycom is a registered trademark of Polycom®, Inc. May 2019
Phone Screens
The VVX 150 2.5” LED screen views:
• Main Menu/Home Screen - Displays menu opons
for sengs and device
informaon. Press Home
from any other screen to
display Main Menu.
• Lines Screen - Default
view when phone is idle.
Displays Lines, Favorites
and condional so keys.
Access Lines with any of
the following:
• From Calls screen, press Lines.
• Select Lines when o-hook.
• From Calls screen, press C > L.
Polycom
®
VVX
®
150 Desktop Telephone
Quick Start Guide

Polycom VVX 150 Specifications

General

Resolution	132 x 64 pixels
Opus Support	No
Wireless	No
Bluetooth	No
USB Port	No
Ethernet Ports	2 x 10/100 Mbps
Power over Ethernet (PoE)	Yes (802.3af)
SIP Accounts	2
Audio Features	HD Voice
Headset Support	Yes
Network Protocols	SIP, SDP
Supported Codecs	G.711, G.729, G.722, iLBC