Switch Between Phone Screens
You can view any screen on your phone from other
screens.
To switch between screens:
» Do one of the following:
Press the Home key to display the Home
screen from the Lines, Calls or Active Call
screen.
From the Calls or New Call screens, press the
Lines soft key to access the Lines screen.
From the Lines screen, press the Calls (Call)
soft key to access the Calls screen.
While on a call, press the C > L and L > C soft
keys to switch between the Lines and Calls
screens.
Place Calls
You can only have one active call in progress on your
phone.
To place a call:
» Do one of the following:
Pick up the handset, press or , enter
the phone number, and press Send.
Enter the phone number, press Dial and pick
up the handset, or press .
From the Lines screen, press the Line soft key,
enter the phone number, and press Send.
From the Home screen, select New Call (Call),
enter the phone number, and press Send.
From the Home screen, select a favorite
contact from Directories (Dirs) > Favorites.
From the Home screen, select a contact from
Directories > Contact Directory or
Directories > Recent Calls.
Answer Calls
You can answer calls on your phone using the handset,
speakerphone, or a headset.
To answer a call:
» Do one of the following:
To answer with the speakerphone, press or
press the Answer (Ans) soft key.
To answer with the handset, pick up the
handset.
To answer with a headset, press .
End Calls
You can end active calls at any time. To end a held
call, you must resume the call first.
To end an active call:
» Replace the handset in the cradle, press or
, or press the End Call soft key.
To end a held call:
1 Select the held call, and press the Resume
(Res) soft key.
2 Press the End Call (End) soft key.
Hold and Resume Calls
You can have multiple calls on hold, and resume a call
at any time.
To hold a call:
» Select the call, and press the Hold soft key.
To resume a call:
» Select the call, and press the Resume (Res) soft
key.
Transfer Calls
You can transfer calls to any contact.
To transfer a call:
1 Press the Transfer (Tsfr) soft key.
2 Choose Blind or Consultative (Cnslt). By
default, Consultative is enabled.
3 Dial a number or choose a contact.
If you chose Blind, the call is transferred
immediately.
To Next Page
Need help?
General
