OFFICE OF CYBER INFRASTRUCTURE AND COMPUTATIONAL BIOLOGY
Polycom Quick Start Guide [DRAFT] [VERSION 1.0] [1/14] 5
END A CALL
To end an active call, replace the handset, press , or press . Or, tap End Call.
To end a held call,
1. Navigate to Calls view and highlight the held call.
2. Tap Resume, and tap End Call.
PLACE A CALL ON HOLD
From Lines, Calls, or Active Call view, tap Hold. If you’re in Calls view, remember to highlight the call first.
To resume a held call, tap Resume from either Lines or Calls view.
TRANSFER A CALL
From Lines, Calls, or Active Call view, tap Transfer, and call the other party. When you hear the ringback sound,
or after you talk with the other party, tap Transfer.
FORWARD A CALL
To enable call forwarding, tap Forward from Home or Lines view. Tap the forwarding type to enable, type a
forwarding number, and tap Enable.
To disable call forwarding, tap Forward from Home or Lines view, tap the forwarding type to disable, and tap
Disable.
To enable per-call forwarding: As your phone rings, tap Forward, enter the forwarding number, and tap
Forward.
To Next Page
Loading...
