1. Set up the pool by following all instructions that come with the pool. Do not
fill water until the Filter Pump is properly installed. Locate the Outlet and
Inlet openings on the pool wall.
3. Install the return fitting on the Inlet opening of the pool.
2. Install the Suction Fitting on the outlet opening of the pool.
SETUP INSTRUCTIONS
4. Remove the Filter Pump , Hoses , and Hose Clamps from
the package.
5
6
7
WARNING:
POSITION THIS PRODUCT AWAY FROM THE POOL, SO AS TO PREVENT CHILDREN FROM CLIMBING ON IT AND ACCESSING THE POOL.
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
1
2
7
1
3
7
5
6
Inlet
Outlet
10
To Next Page
Loading...
