Polygroup RP350-S - Page 16

6. To replace the Rotor Assembly 16 , remove the Volute Cover Screw Set 18 and the Volute Cover 17 and pull out the Rotor Assembly 16 from the Stator 15 .
Insert new Rotor Assembly 16 into the Stator 15 .
7. Align the Shaft Properly and fasten the Volute Cover 17 With the Volute Cover Screw Set 18 .
8. Slowly insert the Motor Assembly 13 bach into the Canister 12 and faster the Motor Assembly 17 With Motor Assembly Washer and Screw Set 21 .
15
16
17
18
16