Polygroup RP350-S - Replacement Parts Ordering; Pump Storage and Winterizing

KEY DESCRIPTION
RP400RP350
PART #
1
2
3
4
5
6
8
9
10
11
12
13
14
16
17
18
20
*
*
*
*
P58PF5470W05
P58PF5480P01
P58PF5520P01
P58PF5460K01
P58125036W01
P58220221W05
P58534000W05
P58031000K01
P58PF5290W05
P58096000K01
P58530000W05
P58F0400C2BS
P58F0400C2GS
P581041037PR
P58050400001
P58PF5270K01
P5816300270B
P58030001K01
P584150006W1
P58PF5620P01
P53FR042BW05
P53FR042SW05
P584125002W1
Winterizing Your Pump and Long-term Storage
After usage, you can easily empty and store away your pump in a safe place. Some pump owners, however, choose to leave their pump up all year round. In cold areas,
where freezing temperatures occur, there can be a risk of ice damage to your pump. We therefore recommend you drain, disassemble, and properly store the pump,
when the temperature drops below 0ºC (32ºF)
Clean the Pump Water Thoroughly
1. Let the pump cool down for at least 30 minutes before storage. Clean the pump water thoroughly.
2. Use only damp cloth soaked in mild soap / detergent and water to clean the outer surfaces of the pump. Do not use any kind of chemical or solvent. Always unplug
the pump and stow the cord during cleaning.
3. Keep out of reach of direct sunlight and chemical substances.
4. Save the original packing box for storage purposes.
5. Remove the pipes (if applicable) and store in a safe place. Be sure all accessories parts are clean and completely dry before storage.
6. Bring pump and assessories. indoors and store in a safe and dry area, preferably between 0ºC (32ºF) and 40ºC (104ºF).
PUMP STORAGE & WINTERIZING
REPLACEMENT PARTS ORDERING INFORMATION
17
OWNER’S MANUAL
P58PF5470W05
P58PF5480P01
P58PF5520P01
P58PF5460K01
P58125036W01
P58220221W05
P58534000W05
P58031000K01
P58PF5290W05
P58096000K01
P58530000W05
P58F0350C2BS
P58F0350C2GS
P581041037PR
P58050350001
P58PF5270K01
P5816300270B
P58030001K01
P584150006W1
P58PF5620P01
P53FR030BW05
P53FR030SW05
P584125002W1
Suction Fitting Base
Suction Fitting Screen
Flow Diverter
Plug
Hose
Hose Clamp
Vent Screw
Vent Screw O-Ring
Seal Top
Canister Gasket
Filter Pump Canister
Motor Assembly
Motor Assembly (UK)
Type D Filter Cartridge
Rotor Assembly
Volute Cover
Volute Cover Screw Set
Filter Pump Port / Fitting O-Ring
59” Hose
1-1/4” to 1-1/2” Rubber Fitting Adapter
For RP Series Filter Pump sold separately
For RP Series Filter Pump sold separately (UK)
102” Hose