Appendix 1: Bluetooth pairing options
PolyVision 19
To determine if the pairing is successful and there is wireless
communication between the PolyVision driver installed on your computer
and the ēno
stylus:
1. Turn on the ēno stylus by removing the cap.
2. On your computer, click the PolyVision icon appears in your system
tray (Windows) or system menu (Macintosh).
3. Choose “Configure the PolyVision driver” from the menu.
4. Click the “Hardware” tab. The stylus should be listed as a hardware
device.
To Next Page
Loading...
