PolyVision eno - Prepare your computer; Driver installation

Preparing the ēno whiteboard for use
6 Installation and Operation Guide
Prepare your computer
To prepare your computer for use:
• Install the PolyVision driver as described below in Driver installation.
• The ēno stylus is a Bluetooth device and must pair with the computer
that interacts with the whiteboard. You can use ēno regardless of
whether your computer has Bluetooth capability built-in. The PolyVision
BT (Bluetooth) adapter adds Bluetooth capability to your computer as
described below in Pairing the ēno
stylus and your computer.
• Connect a projector to your computer using the video cable that is
provided with your projector as described below in Getting started
with your projector.
Driver installation
To use ēno, your Windows-based computer must have:
• Pentium processor
• 512MB RAM
• Windows XP SP2, Tablet XP SP2, or Vista
• One available USB port
To use ēno, your Macintosh computer must have:
• PowerBook, G4, iBook, iMac, or eMac
• PowerPC or Intel microprocessor
• 512MB RAM
• System software OS X (10.3.9 or better)
• One available USB port
To install the PolyVision driver on your computer:
1. Locate and insert the PolyVision installation CD.
2. Installation should begin automatically. If it does not:
Windows: double-click “My Computer” on your desktop and
double-click the removable disk drive named “PolyVision.”
Installation begins.
Macintosh: double-click the PolyVision icon on your desktop,
double-click the “Macintosh” folder, and double-click “PolyVision
Installer.” Installation begins.