PolyVision eno - Using your ēno whiteboard; The ēno whiteboard control icons; To use the on-screen control icons

Using your ēno whiteboard
PolyVision 11
Using your ēno whiteboard
Use the ēno interactive whiteboard with the ēno stylus and a projector
connected to your computer to:
• control your computer from the whiteboard
• run slide presentations and other software from the whiteboard
• mark-up and capture snapshots of your computer screen plus any
writing on the board
The ēno whiteboard control icons
The ēno whiteboard includes control icons that you tap with the ēno stylus
to interact with your computer. The control icons are magnetic so you can
move them to any convenient location on the board. Icon functions are
described briefly below. Refer to the
PolyVision User Guide for details
about each of these functions.
You can also operate the whiteboard using an on-screen version of the
control icons.
To use the on-screen control icons:
1. Click the PolyVision driver icon in the system tray (Windows) or
system menu (Macintosh). The PolyVision driver menu appears.
2. Choose “Show On-Screen Remote Control” from the menu to
toggle on and off the display of on-screen control icons which you
tap with the stylus.