PONSSE H73 - Pressure Adjustments

Service training
000
04052000
7.1
Pressure adjustments
A. SAW (rotate)
B. SAW (feed)
C. TRUNK FEED ROLLERS
D. FRONT DELIMBING KNIVES
E. TILT
F. ROTATOR
G. REAR DELIMBING KNIVES
T. Tank line
P. Pressure line
2. Fast feed direction valve
3. Slow feed direction valve
4. Rear delimbing knife pressure reducer
valve
5. Rear delimbing knife pressure relief
valve
6. Rear delimbing knife check valve
7. Rear delimbing knife direction valve
8. Tilt pressure reducer valve
9. Tilt direction valve
10. Saw check valve
11. Saw pressure reducer valve
12. Saw direction valve
13. Front delimbing knife pressure reducer
valve
14. Front delimbing knife pressure relief
valve
15. Front delimbing knife check valve
16. Front delimbing knife direction valve
17. Feed roller pressure reducer valve
18. Feed roller direction valve
19. Main pressure relief valve
20. Rotator direction valve
21. Feed roller check valve