Installing the Boot Cover
After lowering the convertible top, you may want to
install the boot cover. The three-piece boot cover is
stored in a bag in the hatch.
3.
Install
the
middle section
of
the
cover
by
sliding the
tabs into the slots on the right side cover. Lower the
cover and insert the latch.
4.
Close the hatch.
1.
Open the hatch and remove the two side covers from
the storage bag.
2.
Install
the two side covers by inserting the tab into the
front
seatbelt cover. Lower the covers onto the vehicle.
2-71
To Next Page
Loading...
Need help?
General
