The level should be at the full cold mark.
If
necessary,
add only enough fluid to bring the level up to the
mark.
When the engine compartment is hot, the level
should be at the
H
or hot
mark.
0
When the engine compartment is cool, the level
should be at the
C
or full cold
mark.
What
to
Use
To determine what kind of fluid to use, see
“Recommended Fluids and Lubricants” in the Index.
Always use the proper fluid. Failure to use
the
proper
fluid can cause leaks and darnage hoses and
seals.
1
Windshield Washer Fluid
What
to
Use
When
you
need windshield washer fluid, be sure to read
the manufacturer’s instructions before
use.
If you will be
operating your vehicle in
an
area where the temperature
may
fall below freezing, use
a
fluid that has sufficient
protection against freezing.
Adding
Washer
Fluid
Open the cap labeled WASHER
FLUID
ONLY.
Add
washer fluid until the tank
is
full.
6-32