Rear
Lamps
To
change
any
rear
bulb,
you
have
to
remove
the
entire
housing.
1.
Remove the
trim
panel from the side that you
are
replacing
the
bulb.
2.
Pull the carpet back.
3.
Remove the wing nuts.
L,,,
1
4.
5.
6.
7.
Pull
off
the assembly from
the
outside.
To
remove a socket with a tab, press the tab
and
turn
the socket to the left.
To
remove a socket without a
tab, turn the socket to the left.
To
remove the bulb, pull the bulb from the socket.
Reverse the steps with
a
new bulb.
6-41