If
the belt stops before it reaches the buckle, tilt
the latch plate and keep pulling until you can buckle
the belt.
Pull up on the latch plate
to
make sure
it
is secure.
If
the belt isn’t long enough, see “Safety Belt
Extender” at the end
of
this section.
Make sure the release button
on
the
buckle
is
positioned
so
you would be able to unbuckle the
safety belt quickly
if
you ever had to.
5.
To
make the lap
part
tight, pull down on the buckle
end
of
the belt
as
you pull up
on
the shoulder belt.
1-15
To Next Page
Loading...
Need help?
General
