Checking Transmission
Fluid Cold
A
cold check is made after the vehicle has been sitting
for eight
hours
or
more with the engine
off
and is used
only as a reference. Let the engine run at idle for
five
minutes if outside temperatures
are
50°F
(1
0°C)
or
more.
If
it's colder than
50°F
(lO°C),
you
may have to
idle the engine longer. Should the fluid level be low
during a cold check,
you
must
perform
a
hot check
before adding fluid. This will give
you
a
more accurate
reading
of
the fluid level.
Checking the
Fluid
Hot
or
Cold
0
Park your vehicle on a level place. Keep the
0
With the parking brake applied, place the shift lever
0
With your foot on the brake pedal, move the shift
engine running.
in
PARK
(P).
lever through each gear range, pausing for about
three
seconds in each range, Then, position the shift
lever
in
PARK
(P).
Let
the
engine run at idle for three minutes or more.
~nen, without shutting
off
the engine,
follow
these steps:
k
'rll
3800
V6
Engine Transmission
Dipstick