t
I
3.
Remove the headlamp plate that holds the bulb to the
housing, by removing the two screws on top
of
the
bulb with a torx screwdriver.
'7
I
4.
Pull
out the bulb and disconnect the electrical connector.
5.
Reverse the steps with
a
new bulb.
Front
limn
Signal
1.
Using a screwdriver, remove the screws from the
access panel under the vehicle. Move the access
panel out
of
the way.
2.
Turn the bulb and socket counterclockwise and
gently pull out.
3.
Pull out the bulb.
4.
Reverse the steps with
a
new bulb.
6-39
To Next Page
Loading...
