To Next PageTo Next Page
Need help?Do you have a question about the POOL LAB ASP PL Series and is the answer not in the manual?
General| Type | Photometer |
|---|---|
| Wavelengths | 530 nm, 570 nm, 620 nm |
| Data Transfer | Bluetooth, USB |
| Waterproof | IP68 |
| Temperature Compensation | Automatic |
| Display | LCD |
| Parameters Measured | pH, Free Chlorine, Total Chlorine, Alkalinity, Cyanuric Acid, Calcium Hardness, Bromine |
| Power Source | Rechargeable battery |
| Measurement Range | Varies by parameter (specific ranges not provided) |
| Accuracy | Varies by parameter (specific accuracies not provided) |
| Resolution | Varies by parameter (specific resolutions not provided) |
Warnings related to spa water temperature and health considerations before entering.
Explains the functional sequence of the ASP testing and dosing process.
Guidance on manual water testing and seeking professional advice.
Details on maintaining chlorine levels and the production process.
Target free chlorine levels and their importance for pool sanitization.
Information on reagent bag usage, lifespan, and replacement procedures.
Guidelines for inspecting and maintaining the peristaltic pump for optimal performance.
Setting user authority levels for controlling access to system configuration.
Importance of correctly setting pool and spa volumes for accurate dosing calculations.
Configuring the number of daily water tests performed by the ASP.
Setting the desired free chlorine residual target for automatic adjustment.
Setting the desired pH target for automatic adjustment by the ASP.
Options for checking reagent status and initiating reagent priming cycles.
Manually initiating a water test cycle without chemical delivery.
Priming the acid delivery pump or cancelling a paused acid feed state.
Warranty terms and conditions for products used in domestic pool settings.
Warranty terms and conditions for products used in commercial pool settings.
List of conditions and actions that will void the product warranty.
