OVERVIEW
HOW THE POOL LAB ASP WORKS
This flow chart is a basic representation of the ASP test sequence.
NOTES:
– Acid feed will be halted if filter pump is turned off, or low flow is detected.
– If a large increase in pH is detected, acid feed will be paused for 24 hours.
– Safety limits prevent over feeding of acid, based on pool / spa volume.
9
FILTER PUMP SWITCHES ON
WATER FLOW DETECTED
5 MINUTE DELAY BEFORE FIRST TEST
PH TEST
(Result displayed on screen)
FREE CHLORINE TEST
(Result displayed on screen)
CALCULATE REQUIRED DOSAGES
FOR CHLORINE AND ACID
CHLORINATOR OUTPUT ADJUSTED AUTOMATICALLY
AND ACID PUMP RUN TIMER SET (IF REQUIRED)
WAIT FOR NEXT TEST
To Next Page
Loading...