PoolPak HCD 1400 - Digital Outputs; Analog Inputs; UNIT CONFIGURATION

48 EGW06-PCPEG-20140813
TM
TM
Section V: Operation
The following digital output screens are available:
• Supply Fan
• Compressor
• Bypass Solenoid
• Water Heating Solenoid
• Reheat Solenoid
• AC Solenoid
• Aux Water Heat
• Alarm Output
• ACC Run Signal
• Economizer
• Aux Air Heat Stage 1
• Aux Air Heat Stage 2
Analog Inputs
This menu contains a screen for each analog input. Each screen contains the following parameters:
• Current read-only value from the input.
• Fail
• Tol
• Offs
• Ovrd
• Min
• Max
The following analog input screens are available:
• Discharge Pressure
• Suction Pressure
• Return Relative Humidity
• Suction Temperature
• Return Air Temperature
• Pool Water Temperature
• Surface Temperature
• Outside Air Temperature
UNIT CONFIGURATION
Installed Options
This menu contains parameters that indicate the hardware options installed in the dehumidier. The parameters are set
by the factory and do not typically require modication.
Aux Air Heating
This menu contains parameters that congure the auxiliary air heating system:
Aux Water Heating
This menu contains parameters that congure the auxiliary water heating system:
Temperature Ctrl
This menu contains parameters that congure the air temperature control routines of the dehumidier.