Postek G-2108 - Resolving Common Printer Problems

G-2108/G-3106 User’s Manual Chapter 3: Operations and Settings
30
Reset – Reset the Printer to the Factory Default Settings
1. Press and hold the Cancel/ Reset button for 4 seconds, the three lamps will blink simultaneously (the printer will
return to normal state automatically if no operations are performed within 4 seconds).
2. Release and press the Cancel/ Reset button again.
3. The three indicators stop blinking and remain lit. Now restart the reset is completed.
The following parameters have automatically been reset:
- Label
- Print darkness
- Speed
- Others
Note: The printed label count and printed length may not be reset.
Windows Driver and Label Software
The G-2108/G-3106 printer driver is packaged with the printer in the CD-ROM pack, and is compatible with the
following operating systems:
 Windows 10
 Windows 8
 Windows 7
 Windows Vista
 Windows XP
 Windows 98
 Windows 2000
 Windows 2003
 Windows 95
 Windows 2008
 Windows NT
 Windows XP
Drivers can also be downloaded from www.postek.com.cn and www.postektechnologies.com
Each G-2108/G-3106 printer is also packaged with powerful barcode label editing software.