Postek iQ200 - Chapter 1: Introduction; 1.1 Specifications

iQ200 User’s Manual Chapter 1: Introduction
3
Chapter 1: Introduction
1.1 Specifications
Item
Description
Printing Mode
Direct Thermal
Resolution
203dpi
Max Printing Speed
6 ips (152.4 mm/s)
Max Printing Width
4.09″ (104 mm)
Max Printing Length
40″ (1016 mm)
HEAT
TM
Level
II
Memory
8 MB FLASH ROM, 16 MB SDRAM
Media
Width: 4.72″ (120 mm) max., 0.98” (25 mm) min.
OD: 5″ (127 mm) max. or 9″ (228.6 mm) max. (using External Media
Stand).
ID: 1″ (25.4 mm) min.
Media Thickness
0.0023″ ~ 0.0098″ (0.06 ~ 0.25 mm), including liner
Media Sensor
Reflective/Transmissive
Fonts
Five built-in dot matrix ASCII fonts, user-downloadable TrueType Fonts
Barcode Types
1D Barcode: Code 39, Code 93, Code 128/subset A,B,C, Codabar,
Interleave 2 of 5, UPC A/E 2 and 5 add-on, EAN-13/8/128, UCC-128,
etc.
2D Barcode: MaxiCode, PDF417, Data Matrix, QR Code, etc.
Interfaces
RS-232 Serial, USB DEVICE 2.0
Power Adapter
Input: AC100~240 V, 50~60 Hz
Output: DC 24 V, 2.5 A
Weight
3.97 lbs (1.8 kgs)
Dimensions
W 8.58″ (218mm) x D 10.0″(255mm) x H 5.91″ (150 mm)
Operating
Environment
Temperature: 32 F ~ +104 F (0 C ~ 40 C)
Relative humidity: 5% - 85% non condensing
Storage environment
Temperature: -40 F ~ +140 F (-40 C ~ 60 C)
Relative humidity: 5% - 85% non condensing
Optional Items
Wi-Fi, Bluetooth, Guillotine Cutter, External Label Rewinder, Media
Guide Adapter, 10/100 M Adaptive Ethernet Port
HEAT
TM
, or Heating Equilibrium Adaptive Tuning, is a POSTEK designed and developed
cutting-edge technology that sets the benchmark for heat management in thermal printing. Printers
equipped with HEAT
TM
have significant improvements in their printout clarity and print speed. The
HEAT
TM
level represents the fineness of the heating uniformity with level I being the finest.