Power Electronics SD 300 Series - Torque; Current; Dummy

POWER ELECTRONICS
SD300 – PROFINET
SUPPORTED PROFIDRIVE CYCLIC TELEGRAM
37
Torque
It is the drive output torque. Torque is expressed in percentages (%) and
can be increased and decreased by 0.1%.
CAUTION
Torque value is displayed correctly only if the drive control mode is set
to “Sensorless” or “Vector”.
Current
It is the drive output current. Torque is expressed in amperes (A) and can
be increased or decreased by 0.1A.
Dummy
Not used.