Power Electronics SD 300 Series - 10 Accessing the Common Parameters Using the Profidrive Parameters

POWER ELECTRONICS
SD300 – PROFINET
ACCESSING THE COMMON PARAMETERS USING THE PROFIDRIVE
PARAMETERS
45
10. ACCESSING THE COMMON
PARAMETERS USING THE
PROFIDRIVE PARAMETERS
Using the Profidrive parameters (PNU [1000–1003]), you can access to the
SD300 drive parameters for data reading and writing.
The following diagram explains the parameter writing procedure.
SD300 Parameter Writing
PNU [1000]: = Address
PNU [1001]: = Data
PNU [1003]: = 0
PNU [1002]: = 1
[PNU [1003]
equal to 0]
[PNU [1003] not
equal to 0]
10