Power Master PM-6000LC - Specification of Solar Inverter

20
7.3 AC Utility Failure (Battery Mode)
The AC output comes from battery, passing through DC/AC inverter and
static switch within the battery backup time.
21
8. SPECIFICATION OF SOLAR INVERTER
Model
PM-0800LC
PM-0800SLU
PM-1600LC
PM-1600SLU
PM-2400LC
PM-2400SLU
Capacity VA / Watt
1.2KVA /
800W
2.4KVA /
1600W
3.6KVA /
2400W
Nominal Voltage 220Vac ; 110Vac
Acceptable Voltage
Range
120-275Vac ; 60-135Vac
Frequency 50Hz / 60Hz ( 45Hz - 70Hz)
Line Low Transfer 120VAC ± 2% ; 60VAC ± 2%
Line Low Return 130VAC ± 2% ; 65VAC ± 2%
Line High Transfer 275VAC ± 2% ; 135VAC ± 2%
Input
Voltage
Range
Line High Return 260VAC ± 2% ; 130VAC ± 2%
Voltage
220Vac (230V or 240VAC re-settable via LCD
panel);
110Vac (115V or 120VAC re-settable via LCD
panel)
Voltage Regulation
(Batt. Mode)
< 3% RMS for entire battery voltage range
Frequency 50Hz or 60Hz
Frequency Regulation
(Batt. Mode)
±0.1Hz
Power Factor 0.8
Waveform Pure Sine Wave
Efficiency > 75% > 80%
Line Mode Circuit Breaker
Output
Overload
Protection
Battery Mode 110% ~ 150% for 30 sec., > 150% for 200 ms
Transfer Time Typical * < 8 ms.